Inequalitys Philosophical Description

When examining the statement â€Å"there is hardly any inequality among men in the state of nature† by Rousseau one cannot help but think of the concept of the Ubermensch developed by Nietzsche. Advertising We will write a custom essay sample on Inequality’s Philosophical Description specifically for you for only $16.05 $11/page Learn More Nietzsche describes human beings as being in a phase of intermediate evolution between apes and the overman wherein due to this intermediary state humans can thus be broken down into two distinct categories of master and slave (White and Hellerich, 39). For Rousseau his argument focuses on the apparent equality of all human beings at the point of being born and it is only when outside environmental factors are introduced that the state of inequality among men occurs. This can take the form of having parents who are more economically well off, being born in a 1st world country or being within an area tha t fosters better growth and education. Rosseau does not mention factors relating to physical or mental superiority since for him such factors are developed as a result of environmental consequences and are not inherent in a person at the time of birth. It is only when sufficient environmental influence is enacted on the growth of an individual that true inequality occurs. As such, under the ideas of Rosseau can it can be presumed that if two men were born in exactly the same situation, in the same environment and with the same background and economic circumstances then these men would continue to be equal. Taking this particular viewpoint to its zenith it can thus be stated if a large enough population were born also under the same circumstances, environment, background etc. then everyone in it would be equal as well. This particular conclusion can be arrived to by assuming that the state of nature mentioned by Rosseau means a state with absolutely no outside interference and lett ing the natural progression of human growth take its place. The Master and Slave Concept of Nietzsche The inherent problem with the proposed concept of Rossaeu is that it fails to take into account the possibility of inequality naturally occurring as a result of the need for concerted effort in order to achieve a particular end. Advertising Looking for essay on psychology? Let's see if we can help you! Get your first paper with 15% OFF Learn More Nietzsche argues that humans can basically be divided into two distinct categories namely that of the master and the slave which in essence are distinctions used today in the concepts of leaders and followers (White and Hellerich, 39). It can be stated that from a certain sociological standpoint the concept postulated by Nietzsche does in fact have a basis in the way society is organized. For example, a progressive society cannot be composed entirely of leaders since someone has to be the one to actually follow the orders of the leaders on the other hand a society composed entirely of followers would be unguided and thus would not be able to actually effectively commit to a goal requiring concerted effort. While such a concept agrees with the statement of Rosseau that â€Å"there is no inequality among men in the state of nature† it based more upon physical and biological characteristics rather the psychological (Beyond Good and Evil, 1). By its very nature the concept of leadership places a person above another; Rosseau is actually erroneous in believing that the state of nature does not create inequality when in fact nature itself creates various examples of inequality. For example, packs of wolves have a leader who is the same physically and biologically as all the other members yet is made a the leader due to the necessity for most groups, human or otherwise, to have a guiding force behind the groups actions. This notion is applicable to humans as it is to animals since any concerted eff ort requires a certain dominating personality to be able to control individuals towards a particular goal (Allen, 386 – 402). Thus it can be seen that the concept of inequality occurs naturally in nature (Allen, 386 – 402). Advertising We will write a custom essay sample on Inequality’s Philosophical Description specifically for you for only $16.05 $11/page Learn More In the case of interpreting the state of nature as being an environment with no outside interference towards development inequality will still develop since if there need of any concerted effort in such an environment the concept of a leader will inevitably arise thus resulting in creation of a system of inequality where there is an individual dictating others what to do. Conclusion Based on the findings of this paper I can say that I disagree with the statement of Rosseaus since for me inequality is still evident in most states of nature. I can even go so far as state that inequality is even a necessity in the grand scheme of things. Works Cited Allen, James Sloan. â€Å"Nietzsche and Wilde: An Ethics of Style.† Sewanee Review. 386- 402. University of the South, 2006. Literary Reference Center. EBSCO. Web. â€Å"Beyond Good and Evil.† Ethics (Ready Reference series) (1994): 1. Literary Reference Center. EBSCO. Web. White, Daniel R., and Gert Hellerich. â€Å"The Ecological Self: Humanity and Nature in Nietzsche and Goethe.† European Legacy 3.3 (1998): 39. Academic Search Premier. EBSCO. Web.Advertising Looking for essay on psychology? Let's see if we can help you! Get your first paper with 15% OFF Learn More This essay on Inequality’s Philosophical Description was written and submitted by user Zain Ellison to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

The Story of Eight Remarkable essays

The Story of Eight Remarkable essays When you think of the American Revaluation and the people who impacted it most, you think of Gorge Washington, Paul Revere, Thomas Jefferson or John Adams. Most people over look the significance of the other players, that we really dont hear or talk about. When you think of women who have played roles in the American Revelation you think of Betsy Ross the women who made our countrys flag. People don t look at the other amazing women like the 8 women of this book Glory, Passion and Principle: The Story of Eight Remarkable Women at the Core of the American Revolution. In the past people have disregarded the roles that women have played in our countrys birth. This book introduces the reader to eight women of the American revaluation. Melissa Bohrer, the author introduced us to Sybil Ludington, Phillis Wheatly, Abigail Adams, Mercy Warren, Lydia Darragh, Molly Pitcher, Deborah Sampson and Nancy Ward. Sybil Ludington was the female Paul Revere. She rode over 40-miles, twice that of Paul Revere to warn the militia that British troops were burning Danbury, Connecticut at the age of 16. To hear her story is unbelievable. Gen. Howe himself put a bounty on her fathers head, COL. Ludington. In April, 1777, the British army made a surprise attack on Danbury to seize and destroy Continental Army supplies stored there. A messenger told Col. Ludington that the British were coming so Col. Ludington began to organize the militia. The militia was scattered across Connecticut getting ready for the spring harvest, so it was hard for the messenger to find the militia. The massager soon became exhausted and he was not familiar with the area, and could not be find all of the militia volunteers. Sybil Ludington, who had just turned 16, was very familiar with the area, and volunteered to sound the alert. She left for her now-famous ride at approximately 9 PM into the rainy night, traveling 40 miles from her home in what is now the ...

Feminism Essay Example | Topics and Well Written Essays - 2250 words

Feminism - Essay Example That function gives women such wisdom and power as no male ever can possess. When women can support themselves, have their entry to all the trades and professions, with a house of their own over their heads and a bank account, they will own their bodies and be dictators in the social realm. Elizabeth Cady Stanton, 1890 (Banner, 1980) The activists for women's rights in the nineteenth century may have read Godey's Lady's Book and the same domestic novels as their neighbors, but they believed that women's moral superiority justified their working for women's equality inside and outside the home. Why did they challenge the prevailing restrictions on women How did their own experiences in the family lead them to a feminist consciousness How did their domestic experiences shape their feminist thought and action Family issues--women's property rights, child custody, marriage, reproductive control, and divorce--were central to the early women's rights advocates' understanding of women's oppression. The Declaration of Sentiments passed in 1848 at Seneca Falls, New York, as well as the resolutions passed at other women's rights conventions, reflected the centrality of these concerns. Elizabeth Cady Stanton, along with many Quakers and Spiritualists, were the strongest advocates for marriage reform, both before and after the Civil War, when the women's rights movement as a whole narrowed its platform to concentrate on the vote. This emphasis on family issues stemmed from the supporters' own domestic experiences--empowering as well as restrictive--and from their outrage over the victimization of other women by abusive husbands. Aware of the precariousness of women's covert domestic power, many early activists for women's rights forged a feminist agenda designed to benefit women and their familie s. Elizabeth Cady Stanton, Susan B. Anthony, Lucy Stone, Antoinette Brown Blackwell, and other notable feminists who were dismayed by the slow progress of achieving public power sought to apply feminist principles in their own lives. They pursued two major alternative strategies: combining marriage, motherhood, and careers; or choosing single celibate lives dedicated to reform (Banner, 1980). Many early advocates for women's rights came to a feminist consciousness as they perceived the disparities between their own experiences as wives and mothers and the cultural ideals of true womanhood. Some of them came to an awareness of their subordination when they were discriminated against in the abolitionist and temperance movements. In these movements they gained valuable political organizing experience through public speaking, lobbying, and petition campaigns. For others their feminist consciousness stemmed from their experiences as Quakers and Spiritualists. Women spoke in Quaker meetings, became ministers, held separate business meetings, and had equal educational opportunities. Feminists against the Traditional Family Certain topics were almost universally taboo in nineteenth-century America. Even husbands and their wives avoided discussing sex, homosexuality, prostitution, insanity, illegitimate children, birth control, and suicide. In a time when nudity was considered indecent, Hiram Powers's statue of a nude female titled Greek Slave caused uproar. Some museums had a "ladies hour" when women could view the statue

SWOT analysis Essay Example | Topics and Well Written Essays - 2000 words

SWOT analysis - Essay Example On the other hand, the findings of SWOT analysis lay the basis for developing tourism development and improvement programs that may come from the government. Therefore, this essay seeks to present a SWOT analysis of Malaysia as a destination and present the findings to the relevant authorities to find the best way of developing the country’s thriving and lucrative industry. Malaysia boasts of many tourist attractions ranging from the modern cities to the rich biodiversity (Chong, 2014). Tourists can enjoy themselves in a clean and large modern cities. On the other hand, the country offers opportunities for hiking where tourists can enjoy natural trails in the tropical jungles rich with plants, insect life, and animals. Tourists can also sunbathe on countrys unique sand beaches or can as well scuba dive in Malaysias rich coral reefs (Wong, Velasamy, & Arshad, 2011). The implication is that Malaysia, apart from the big and clean cities, is also rich in biodiversity but the effects that conventional tourism activities leave on the environment requires a deeper understanding of how to integrate tourism planning with biodiversity conservation. Moreover, the country provides mountain climbing experiences where tourists can tower the Malaysian mountains rich with strawberries and enjoy the view of tea plantations (Chong, 2014). Most of the Malaysian mountains lay within the central parts of the country, and the agglomeration of the modern cities provide unique experiences for visitors. Therefore, this essay seeks to carry out a SWOT analysis of Malaysias tourism industry. The government of Malaysia has put more effort to developing tourism in the country because it does not want the country to depend entirely on exports for economic growth. Thus, the government has initiated many projects with the aim of improving tourism sector to become a significant foreign exchange earner.

Employing Strategy in a Competitive Environment Research Paper - 1

Employing Strategy in a Competitive Environment - Research Paper Example It is important for the organization to review all the employment policies and do necessary changes to maintain its good brand reputation. Economical Growth of US economy got affected due to recent financial crisis and economic recession. Recently, people are trying to consume low priced quality products. In addition to this, competitive pricing strategy of several local and international competitors is affecting the market share growth of Walmart (Lamb, Hair & McDaniel, 2008). It will be effective if the organization tries to introduce economically priced differentiated products by reducing its business operation cost. Social The organization terminated employees during and after the financial crisis and recession. Although it is considered as the leading employer within the country, but this strategy affected its brand image. They need to focus on employee specific strategies and business practices in order to get support from government and stakeholders. Technological Technologica l development of US motivated Walmart to implement advanced technology in business operation process. This adoption of advanced technology is resulting in job loss of employees. It is creating a negative image and perception. The organization should use both manual and automatic process in business organization. A technological process or machine cannot run without effective knowledge of employees. Environmental Recently the organization faced several environmental issues regarding cutting of trees in order to produce and distribute wooden furniture to the target customers. Walmart should follow each and every environmental policy developed by government and should use substitute resources of wood in furniture manufacturing process. It would not hamper the market share as demand of customers is ever rising. Strength and Weaknesses This part of the report will evaluate the organization’s strengths and weaknesses based on above environmental scan. Strengths Walmart is the large st employer in US. The organization gets huge political support from the government as it helps to minimize the unemployment rate of the country. In addition to this, adoption and implementation of advanced technology in business process is helping the organization to meet customer satisfaction and current market demand. Differentiated product line is helping the organization to achieve phenomenal market share growth (Draft, 2009). Continuation of these strategies and business practices will help organization to reduce business operation time and develop a potential client base that can be considered as major competitive advantages. Weaknesses Lack of sustainability in business operation, failing to follow environmental policies, job loss during the economic slowdown and critical workplace conflicts are considered as major weaknesses of Walmart (Pride & Ferrell, 2004). The organization needs to reform and modify their business operation strategies to mitigate business associated ris ks and challenges. Competitors K-Mart is one of the major and leading competitors of Walmart in US market. K-Mart also operates within the same industry with similar kind of business model. This retail chain offers differentiated products in competitive price to increase the number of target customers and market share. But Walmart has effectively introduced several unique strategies that helped them to achieve potential competitive advan

The Benefits Of Bim Challenges Information Technology Essay

The Benefits Of Bim Challenges Information Technology Essay On January 21, 2008 the stock markets around the world tumbled. No one has felt the effects of the recession more than here in the United States. Many have compared these events to as the worst economical events since the great drepression. Thousands of companies have had to close doors because of the lapse in the economy. Construction type companies are some of those companies that have struggled emensly during the recession. Construction companies have had to do many things they would normally not do just to keep the doors open. Many cconstruction companies have had to look at inovaitive stratagies just to stay ahead of the competition. Companies such as J.F. Ahern Co., have began to use one strategy that that has cost them both time and money. Innovative stratigies are risky, they dont always work. However in this case the J.F.Ahern Co. has use this stategy to not only improve the product side of there product, but has also used this strategy to help inprove the experience for the customer. J.F.Ahern Co. has introduce the use of building information modeling as a strategy to keep them ahead of the rest. Body The use of BIM (building information modeling) has started to become very popular in the construction industry. It is being utilized by all parties involved in current building projects including architects, engineers, contractors, and even owners. BIM started out as a design tool as preliminary ideas but is now implemented into all the project phases from initial design to final completion. The questions about BIM in todays industry is, are contractors utilizing BIM to its full potential and is it worth the cost of implementing BIM? Its seems that larger contractors will be able to make the transition to BIM more easily than smaller subcontractors or specialty contractors. J.F. Ahern Co. is a mechanical and fire protection contractor that has been using BIM since 2003. What caused J.F. Ahern Co. to start using and continue using BIM during these challenging and tough economic times? They were using BIM before contractors were taking fewer profit margins on projects and prior to the building industry slowing down. J.F. Ahern Co. described the implementation of BIM in their company by saying we will continue to use it because it is the way the industry is going. Embrace it or be passed up by the competition. (Eichers) This shows that the industry is evolving into one that will be dependent on BIM in the near future. As a company if your competitors are utilizing BIM it will cause you to adapt in the same way. This means that small and large contractors will be caused to shift to using BIM practices sooner or later. The case study is to determine how contractors are affected by BIM and the cost to benefit. J.F. Ahern Co. has decided to be a leader in the industry regarding BIM so they can use it as a marketing tool to acquire more work. This would be worth the cost of implementing BIM because they are obtaining more work as a result of its use. They have continued to invest time and money to become knowledgeable and trained in order to better utilize BIM. J.F. Ahern Co. explained that many architectural and engineering firms are using 3-D modeling software like Autodesk Revit to model buildings and systems or equipment. The challenge is using the Revit models and converting them into usable models for design fabrication without having to completely redraw everything. Some contractors are hiring design technicians to work with 3-D model s and make them functional. This requires extra labor and is a cost of BIM that some contractors are willing to pay while others are not. J.F. Ahern Co. has not needed to hire staff for this position but they are keeping up with training due to changing technology and software. Another cost of using BIM technology for a contractor is the equipment needed to run the software. In their case they had to invest in computers capable running multiple 3-D programs at one time, RAM space, video cards and more. In their company not everyone needs to be BIM technology savvy. Only the CAD mangers of each disciplin e are the people directly working on BIM and the 3-D models. It seems the future of BIM is already here in the architecture, engineering, and construction industry. In the summer or 2009 Wisconsin became the first state to require architect and engineers to use BIM on large public buildings explained by Jeff Brown in the article Wisconsin Bets on BIM. The Wisconsin Division of State Facilities (DSF) is the authorities who issued the requirements and guidelines on public projects. BIM will be required in all phases of design and up to date models will be provided throughout the construction process. The owner will receive a finished model at project completion. This shows that contractors of all disciplines and size will need to adapt to the changing industry. Companies like J.F. Ahern Co. are already ahead of the curve and seeing the benefits of using BIM. When asked about their company being ahead or behind the curve in the use of BIM they said Just ahead but everyone is catching up. At least everyone that wants to be a player in the industr y. (Eichers) They see that BIM is a vital part in the industry and will soon be a must. Large Contractors like Barton Malow Co. has been one of the leaders in the industry coordinating subs to work with BIM. They have seen some disciplines in the industry adapt to using BIM but others are behind. Alex Ivanikiw of Barton Malow Co. says The steel fabricators are clearly out in front of all other trades. The mechanical and electrical specialty contractors are getting on board, particularly the HVAC and their shop drawing guys. The ones behind the curve are the architectural trades. The concrete, curtain-wall and interiors people are well behind in adopting and implementing BIM stated in the article Subcontractors Take Their Time Adoption Follows Uneven Paths by Tom Sawyer. BIM has been utilized in the most costly part of construction projects. 3-D modeling software can be expensive and using the software can be difficult and timely. J.F. Ahern Co. uses several softwares including Autocad, Bentley Autoplant (industrial piping), Cad Mech (HVAC piping and plumbing), Cad Duct (HVAC Ductwork), Revit, and Navisworks. They use these 3-D modeling tools every day in many aspects. Each project is unique and requires different practices in utilizing BIM. They represent HCAV systems for design, coordination, and fabrication. BIM is a commonly used term in the industry and may refer to different things as contractors will use it for various benefits. J.F. Ahern Co. uses Building Information Modeling as a process of embedding information in the model that will be useful at a later date such as shop drawings, manufacturer data, service manuals and more. Contractors have only begun to use BIM as a project tool. When used effectively contractors can visualize and track other project data such as submittals. With better collaboration and co mmunication among party members in the project change orders and requests for information may be reduced. Another reason why contractors will need to transition into using BIM is the utilization in all construction phases. J. F. Ahern Co. uses BIM in design, pre-construction, coordination, fabrication, and installation. As a mechanical and fire protection contractor J.F Ahern Co. uses BIM for fabrication purposes. Prefabrication is the process of assembling systems and equipment in the shop and transporting them to the site for installation. BIM can be a great tool for prefabricated components in construction. There are many advantages of prefabrication including quality control, less construction waste, reduced labor in the field, and construction time is reduced. All these advantages can drive project costs down and lower the contract price. J.F Ahern Co. does a lot of prefabrication on the plumbing side that issued directly from the fabrication shop from the 3-D coordinated drawings. They do some prefabricated work on the duct side when it is possible to logistically get prefabricated items into the building. Their goal is to greatly increase the amount of prefabrication in the future. Using BIM and 3-D modeling enables J.F. Ahern Co. to make the installation of their systems and equipment go more smoothly. This is one of the aspects where BIM offers a great advantage over contractors who dont have the same technology. BIM offers various advantages throughout a construction project form initial design to final completion. The use of BIM allows J.F Ahern Co. to identify problems much earlier in the project and hopefully get the issues worked out before anything goes to fabrication and causes costs impacts due to changes that have to be made. The use of BIM also allows them to identify areas where architectural changes may have to be made to accommodate the mechanical systems. The earlier these changes can be made the less of a cost impact they have for the owner. J.F Ahern utilizes BIM as a quality control issue to make sure there are no mistakes that drive up costs in the end. This will increase the cost to benefit ratio because it will help keep clients and obtain work in the future. This requires coordination between multiple members on a project to ensure the entire project as a whole is problem free. Dave Morris is director of virtual construction for EMCOR Construction Services and on the Asso ciated General Contractors BIM forum subcommittee. In an article by Tom Sawyer Subcontractors Take Their Time Adoption Follows Uneven Paths, Morris explains that risk and liability to all parties can be eliminated by brining all trades early in the project phases to ensure constructability. Problems exist when underperforming subcontractors dont implement BIM when all other parties on the project do. This is when special coordination and collision problems arise causing delays and inefficiencies in projects. Morris explains that these types of problems have led to a recommendation by the AGCs BIM subcommittee to add protocol to contracts in an appendix or instruction to bidders that anything a subcontractor decides not to model cannot be installed until all modeled components have been. This is a sign that BIM will be mandatory on future projects. Companies like J.F. Ahern Co. are already ahead of the curve using BIM technology and will only benefit more as the industry changes. The y already have the infrastructure in their company and will keep seeing the benefits in the future. BIM can be used as a project management tool among other purposes. The question is how effective is it in a project being completed more smoothly with better coordination and communication among project participants. BIM is intended for everyones use from the general contractor to the smaller subcontractors. With better collaboration on a project there would be a lower number of requests for information and change orders. J.F. Ahern Co. hasnt seen a reduction in change orders or request for information but issues are identified much earlier in the project and reducing cost impacts. They feel in the future when BIM becomes more common in the industry they will see a reduction in change orders and requests for information when implemented as its intended use initial concept and design stages. BIM also offers much improved communication between the owner and project participants. Communication between subcontractors and general contractors is more efficient on BIM utilized projects. J.F Ahern Co. thinks it helps communicate a lot of the information in a much clearer venue. The information was always available but there was never a good way to convey it unless you were dealing with someone that understands the industry and construction. BIM is a great visual representation and easy to understand. It is a great tool to present to owners because they can understand how the construction process will work very easily. This is a great benefit of BIM and makes it worth the costs and time used to implement it. J.F Ahern Co.is maximizing its use for profit. The real question behind BIM is the cost to benefit ratio. J.F Ahern Co. wasnt able to quantify this in a number but the perception is that it does save money. Their process of design and installation gets done sooner, smoother with fewer problems so one would think that cost savings have occurred. They have seen savings in field labor on previous projects with the upfront work done correctly. Other subcontractors and specialty contractors do report savings in regards to BIM. Form the source of Ghafari/Barton Malow subcontractors report BIM savings in these categories: fabrication cost (3%), overall schedule (21%), shop drawing time (14%), installation cost (12%), material cost (11%), field supervision (10%). These are all substantial costs on a project and the argument would be that investing in BIM is worth its costs. Return on Investment Between Project Participants Return on BIM Investment Architects Engineers Contractors Owners Over 100% 5% 4% 10% 11% 50-100% 7% 2% 8% 2% 25-50% 14% 6% 11% 7% 10-25% 19% 11% 27% 34% Less than 10% 13% 22% 17% 16% Break Even 23% 22% 16% 25% Negative 19% 32% 13% 5% Source: ENR: Engineering News Record The above table shows the perceived return on overall BIM investment. The numbers in the table represent the percentage of respondents from the various disciplines of the construction industry. The information in the table was taken from the article Market Study Finds Engineers Get Lowered Return From BIM by Nadine Post. This information shows that contractors and owners benefit the most by using BIM. This is evident with J.F. Ahern Co. that they do save money and generate profits because of BIM. Larger contractors are able to invest more in BIM while medium size and smaller contractors have to make a financial decision based off of the return on investment. According to the market report, The Business Value of BIM issued by ENR showed that nearly 50% of the contractors who responded say BIM utilization increased profits. On another positive note about BIM is that 63% of participants say they see a positive return on BIM investment. Contractors of all disciplines and sizes should inv est in BIM and there are numbers to back it up. Even in the tough economic times contractors are finding ways to gain an advantage over competition. BIM and 3-D modeling is a great way to acquire future work and stay profitable. Its worth the cost to use BIM because even owners see a return on investment. Conclusion Even though the economy and the times have been tough, companies like J.F. Ahern Co. have used innovative strategies to help grow their business. They have seen quantitative benefits to their efforts of introducing strategies such as BIM. The widespread use of programs such as BIM can be seen throughout the construction industry and the results seem to vary. However, companies that are using BIM and using it well seem to be a cut above the rest. Its not easy for companies to begin new and expensive strategies during hard time, but J.F. Ahern Co. have seemed to have made the most of the opportunity. In the end, innovate strategies very well might be the piece of the puzzle that keeps midsized construction companies alive. The economy and construction industry might not see the immediate end to their struggles, however companies that are willing to adapt to new innovate strategies continually place themselves in positions to succeed.

The Odyssey Homer characterizes the Kyklops in such a way as to reveal :: Classics

The Odyssey Homer characterizes the Kyklops in such a way as to reveal the birth of Odysseus’s well profound strengths as well as his inability to exercise restraint.In this essay I will analyze the significance of the one eyed Kyklops The Odyssey Homer characterizes the Kyklops in such a way as to reveal the birth of Odysseus’s well profound strengths as well as his inability to exercise restraint. In this essay I will analyze the significance of the one eyed Kyklops Polyphemos as an attempt to study Homer’s characterizing of the main character Odysseus. I will analyze the Kyklops’s interaction with Odysseus and will identify the various literary techniques used by Homer while simultaneously explaining the significance and effectiveness of these methods to the plot development of this epic poem. In order to present this pre-eminent epic of action to a more striking effect, Homer uses two devices of characterization, the epithet and the simile in book IX when he describes the scene involving Polyphemos and Odysseus. Both techniques were used to provide additional information about the two characters and to reveal different aspects of Homer’s development of Odyssey’s state of mind. After the war of Troy Odysseus and his crew attempted to find their way back to Odysseus’s home Ithaca, but due to their lack of responsibility they were met with some resistance and choose to rest on a strange island inhabited by a Kyklops. Upon arriving on the island Odysseus and his men naively feasted on readily abundant food found in a secluded cave without first exploring the island to see whether any threats lay near. Then curious Odysseus suggested that they explore and seek knowledge about the native people of the unconquered lands in order to decipher whether they were â€Å"wild savages †¦ or hospitable†¦ god fearing men† (188 -189). This is the first instance amidst a series of others where Odysseus neglects his role as leader and causes the fate of his crew and the journey to become jeopardized. His decision to explore the island of is what caused his main goal of returning home to Ithaca to become destined for failure. Odysseus stumbles onto a prodigious giant; this giant was Polyphemos, son of Poseidon, Greek God and ruler of the seas. When Polyphemos returns to his cave (the same cave where Odysseus and his men feasted) he realizes that his unannounced guests were expecting a warm welcome despite the fact that they had just finished raiding his cattle. The giant understandably refuses to show them any hospitality and begins to devour them one by one. Through this chaotic encounter the consequences of Odysseus’s bad leadership skills materialize, and we The Odyssey Homer characterizes the Kyklops in such a way as to reveal :: Classics The Odyssey Homer characterizes the Kyklops in such a way as to reveal the birth of Odysseus’s well profound strengths as well as his inability to exercise restraint.In this essay I will analyze the significance of the one eyed Kyklops The Odyssey Homer characterizes the Kyklops in such a way as to reveal the birth of Odysseus’s well profound strengths as well as his inability to exercise restraint. In this essay I will analyze the significance of the one eyed Kyklops Polyphemos as an attempt to study Homer’s characterizing of the main character Odysseus. I will analyze the Kyklops’s interaction with Odysseus and will identify the various literary techniques used by Homer while simultaneously explaining the significance and effectiveness of these methods to the plot development of this epic poem. In order to present this pre-eminent epic of action to a more striking effect, Homer uses two devices of characterization, the epithet and the simile in book IX when he describes the scene involving Polyphemos and Odysseus. Both techniques were used to provide additional information about the two characters and to reveal different aspects of Homer’s development of Odyssey’s state of mind. After the war of Troy Odysseus and his crew attempted to find their way back to Odysseus’s home Ithaca, but due to their lack of responsibility they were met with some resistance and choose to rest on a strange island inhabited by a Kyklops. Upon arriving on the island Odysseus and his men naively feasted on readily abundant food found in a secluded cave without first exploring the island to see whether any threats lay near. Then curious Odysseus suggested that they explore and seek knowledge about the native people of the unconquered lands in order to decipher whether they were â€Å"wild savages †¦ or hospitable†¦ god fearing men† (188 -189). This is the first instance amidst a series of others where Odysseus neglects his role as leader and causes the fate of his crew and the journey to become jeopardized. His decision to explore the island of is what caused his main goal of returning home to Ithaca to become destined for failure. Odysseus stumbles onto a prodigious giant; this giant was Polyphemos, son of Poseidon, Greek God and ruler of the seas. When Polyphemos returns to his cave (the same cave where Odysseus and his men feasted) he realizes that his unannounced guests were expecting a warm welcome despite the fact that they had just finished raiding his cattle. The giant understandably refuses to show them any hospitality and begins to devour them one by one. Through this chaotic encounter the consequences of Odysseus’s bad leadership skills materialize, and we